Polymer rubber stamp making training. Tamil – பாலிமர் ரப்பர் ஸ்டாம்ப் – Tamil – ENGLISH SUB TITLE


How to make polymer rubber stamp PLACE SUBJECT- INKJET FLIM ON BOTTOM GLASS. AND COVER THE FLIM ON THIN PLASTIC COVER SHEET WITHOUT BUBBLES. NOW STICK TAPE ON AROUND EDGE OF INJECT FLIM. NOW POUR( FILL UP) POLIMER SOLUTION ON ABOVE INJECT FILM WITHIN STICKING TAPE AREA. NOW POUR( FILL UP) POLIMER SOLUTION ON ABOVE INJECT FILM WITHIN STICKING TAPE AREA. REMOVE BUBBLES FROM POLIMER SOLUTION. AND PLACE BACK COVER SHEET ON (SUBJECT) TOP OF POLIMER FILED INKJECT FLIM. AND PLACE BACK COVER SHEET ON (SUBJECT) TOP OF POLIMER FILED INKJECT FLIM. NOW PLACE THIN PLASTIC COVER ON THE SUBJECT. NOW PLACE TOP GLASS ON BOTTOM GLASS. NOW CLOSE THE TOP DOOR OF THE MACHINE. AND SET TOP LIGHT TIMING 15 SEC ON TIMER. NOW, TURN ON TOP LIGHT (11 SEC) . NOW, TURN ON TOP LIGHT (11 SEC) AFTER 11 SECONDS OFF TOP LIGHT. NOW SET BOTTOM LIGHT TIMING 190 SEC ON TIMER. NOW, TURN ON BOTTOM LIGHT (190 SEC) AFTER 190 SECONDS OFF BOTTOM LIGHT. AFTER 190 SECONDS OFF BOTTOM LIGHT. NOW OPEN MACHINE ,AND REMOVE TOP GLASS. NOW REMOVE TOP THIN PLASTIC COVER ON SUBJECT. NOW REMOVE TOP THIN PLASTIC COVER ON SUBJECT. NOW REMOVE RUBBER STAMP WITH BACK COVER SHEET. NOW APPLY SOAP WATER ON THE RUBBER STAMP, AND WASH RUBBER STAMP WITH SMOOTH
BRUSH AND CLEAR EXTRA POLIMER SOLUTIONS FROM RUBBER STAMP. NOW APPLY SOAP WATER ON THE RUBBER STAMP, AND WASH RUBBER STAMP WITH SMOOTH
BRUSH AND CLEAR EXTRA POLIMER SOLUTIONS FROM RUBBER STAMP. 20.NOW DROP POLIMER STAMP IN SALT WATER BOX. 20.NOW DROP POLIMER STAMP IN SALT WATER BOX. 20.NOW DROP POLIMER STAMP IN SALT WATER BOX. PLACE BOX IN CURING BOX IN MACHINE WITH 300 SECONDS. PLACE BOX IN CURING BOX IN MACHINE WITH 300 SECONDS. AFTER 150 SECONDS SWITCH OFF MACHINE ,TAKE
OUR RUBBER STAMP AND TRIM THE EDGES,AND PASTE IT ON CORRECT SIZE HANDLE. AFTER 150 SECONDS SWITCH OFF MACHINE ,TAKE
OUR RUBBER STAMP AND TRIM THE EDGES,AND PASTE IT ON CORRECT SIZE HANDLE. AFTER 150 SECONDS SWITCH OFF MACHINE ,TAKE
OUR RUBBER STAMP AND TRIM THE EDGES,AND PASTE IT ON CORRECT SIZE HANDLE.

11 Replies to “Polymer rubber stamp making training. Tamil – பாலிமர் ரப்பர் ஸ்டாம்ப் – Tamil – ENGLISH SUB TITLE”

  1. Sir polimer stamp, preink stamp 2machine vaanganuma sir.
    1 machine LA rendum panamudiyadha?

  2. The worst video I have ever seen
    When you are giving training avoid unnecessary words and hold the camera properly

Leave a Reply

Your email address will not be published. Required fields are marked *